Set Up Your Beako Bird Feeder

Step 1: Download and Sign In to the Kiwibit App

1. Download the Kiwibit App from the App Store or Google Play.
2. Open the app and register a new account, or sign in to your existing account.

Step 2: Charge, Power On, and Activate Pairing Mode

1. Push the latch upward and remove the camera from the feeder.
2. Lift the soft rubber cover on top of the camera. Underneath, you’ll find the Power button, DC 5V charging port, microSD card slot, and the small P hole.
3. Before setup, fully charge the camera using a DC 5V / 1.5A power adapter and the included USB-C charging cable. A full charge takes approximately 8 hours. The indicator light is yellow while charging and turns green when the camera is fully charged.
4. After charging, press and hold the Power button for about 3 seconds, until the blue status light begins flashing and you hear a repeating “ding ding ding ding” sound every 8–9 seconds. This means the camera has powered on and entered pairing mode.
   Note:
   If you do not hear the repeating pairing sound, double-press the Power button to activate pairing mode.

Step 3: Connect Your Beako Feeder in the Kiwibit App

1. Open the Kiwibit App.
2. On the Live page, tap the + icon in the upper-right corner.
3. Select Add New Device.
4. Follow the in-app instructions to connect your feeder to Wi-Fi.
   Note:
   1. Please allow Bluetooth and Location permissions when prompted so that the app can connect to your feeder smoothly.
   2. The feeder supports 2.4 GHz Wi-Fi only. Please select a compatible network during setup.
5. Once the feeder has connected to Wi-Fi, the repeating pairing sound will stop, the blue status light will stop flashing, and the feeder will appear on the Live page.
6. Finally, insert the camera into the feeder body until it clicks securely into place.

Tips Before Installation

• Fully charge the camera before installation.
• Place the feeder within strong Wi-Fi range for stable performance.

Helpful Videos

Have questions or need help?